Desain dan Fabrikasi Antena Rhombic untuk Aplikasi Telemetri Data pada Frekuensi 433 MHz
Abstract
Perkembangan riset komunikasi modern saat ini mengarah pada komunikasi satelit. Telemetri data atmosfer yang kemudian dikirimkan ke ground segment menjadi bagian dari komunikasi satelit. Untuk mendukung sistem komunikasi tersebut, diperlukan antena yang baik agar dapat menerima data pada jangkauan yang jauh. Pada penelitian ini telah dilakukan proses desain, fabrikasi, pengukuran, dan pengujian antena Rhombic untuk mendukung aplikasi telemetri data. Desain antena diawali dengan melakukan perhitungan sesuai spesifikasi yang diinginkan dan dilanjutkan dengan simulasi menggunakan software 4nec2. Hasil pengukuran antena yang telah difabrikasi menunjukkan adanya pergeseran frekuensi dari 433 MHz menjadi 416 MHz. Pada frekuensi 416 MHz, frekuensi optimum antena, terukur nilai VSWR sebesar 1,53 dan return loss sebesar −13,45 dB. Kemudian dilakukan pengujian secara langsung dengan cara menjadikan antena Rhombic hasil fabrikasi menjadi antena penerima dan modul radio 3DR sebagai sistem pemancar. Hasil pengujian langsung (outdoor) diperoleh jangkauan antena dapat menerima data hingga 3,94 kilometer. Secara umum, antena Rhombic hasil fabrikasi bekerja dengan baik pada frekuensi optimum, namum masih terdapat ruang untuk dilakukan perbaikan dan pengembangan kedepannya.
References
[2] “Advantages of Rhombic antenna | disadvantages of Rhombic antenna.” https://www.rfwireless-world.com/Terminology/Advantages-and-Disadvantages-of-Rhombic-antenna.html (accessed May 14, 2020).
[3] N. K. Darimireddy, R. R. Ramana, N. Rajasekhar, and P. SrinivasaRao, “Rhombic Slotted Pentagonal Patch Antenna for GPS Applications,” in 2018 IEEE Indian Conference on Antennas and Propogation (InCAP), Dec. 2018, pp. 1–4. doi: 10.1109/INCAP.2018.8770830.
[4] N. A. Eltresy, H. A. Malhat, and S. H. Zainud-Deen, “A rhombic nanoantenna for infrared detection applications,” in 2017 34th National Radio Science Conference (NRSC), Mar. 2017, pp. 9–14. doi: 10.1109/NRSC.2017.7893461.
[5] K. K. A. John and T. Mathew, “Rhombic Split Ring Resonator (R-SRR) RFID tag for UHF band,” in 2016 Progress in Electromagnetic Research Symposium (PIERS), Aug. 2016, pp. 5179–5182. doi: 10.1109/PIERS.2016.7735868.
[6] H. Nornikman, B. H. Ahmad, Z. Zakaria, N. E. S Ramlee, M. Z. A. Abd Aziz, and M. K. Ismail, “Multiband Minkowski Fractal Patch Antenna with Rhombic SRR for Wireless LAN and WiMAX Applications,” in 2018 IEEE International RF and Microwave Conference (RFM), Dec. 2018, pp. 85–88. doi: 10.1109/RFM.2018.8846542.
[7] S. Aisyah, D. Untari, and H. Wijanarko, “Design of Data Acquisition System of Environmental Parameter in Riau Islands using myRIO,” in 2019 2nd International Conference on Applied Engineering (ICAE), Oct. 2019, pp. 1–6. doi: 10.1109/ICAE47758.2019.9221689.
[8] S. Aisyah, M. L. Prasetyo Nugroho, Kamarudin, and H. Wijanarko, “Image Transmission Performance Over UHF Channel Using Real Time Processing in LOS and NLOS Transmission,” in 2019 2nd International Conference on Applied Engineering (ICAE), Oct. 2019, pp. 1–6. doi: 10.1109/ICAE47758.2019.9221658.
[9] H. Wijanarko, M. Hanif, S. Aisyah, and K. Kamarudin, “Desain dan Implementasi Antena Quadrifilar Helix untuk Komunikasi Antarpulau pada Pita UHF,” Jurnal Rekayasa Elektrika, vol. 16, no. 2, Art. no. 2, Aug. 2020, doi: 10.17529/jre.v16i2.15486.
[10] S. Joana Halder and W. Kim, “A Fusion Approach of RSSI and LQI for Indoor Localization System Using Adaptive Smoothers,” Journal of Computer Networks and Communications, vol. 2012, pp. 1–10, 2012.
[11] F. J. Casadevall Palacio et al., “Radio environmental maps: information models and reference model. Document number D4.1,” Apr. 2011, Accessed: May 11, 2020. [Online]. Available: https://upcommons.upc.edu/handle/2117/14940
Manuscript submission
Submission of a manuscript to the Journal of Applied Electrical Engineering (JAEE) implies that the work described has not been published before (except in the form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by responsible authorities at the institution where the work was carried out.
The author warrants that his/her contribution is original and that he/she has full power to make this grant. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. The author affirms that the article contains no unfounded or unlawful statements and does not violate the rights of others. If copyrighted works are included, the author bears responsibility to obtain written permission from the copyright owners and to appropriately credit the sources.
The use of general descriptive names, trade names, trademarks, etc. in the publication, even if not specifically identified, does not imply that these names are not protected by the relavant laws and regulation.
Copyright Transfer Agreement
The Copyright Transfer Agreement must be signed and return to the publisher of JAEE before manuscript can be accepted for publication. The Transfer of copyright to JAEE becomes effective if and when the article is accepted for publication. if the submitted manuscript is not accepted by Journal, all rights will returned to the authors of the work.
All articles published in JAEE are protect by copyright, which cover the exclusive and unlimited rights to reproduce and distribute the article in any form of reproduction (printing, electronic media or any other form), as well as the translation rights for all languages and countries, for the full term (including extensions and renewals). No material published in the JAEE may be reproduced photographically or store on microfilm, in electronic databases, video disk, etc., without first obtaining written permission from the publisher.
Author's rights
The author may send or transmit individual copies of the final published version of his/her manuscripts any format, including the PDF, to colleagues upon their specific request provided no fee is charged, and further-provided that there is no systematic distribution of the manuscript, e.g. posting on a listserve, website or automatic delivery. However posting the article on a secure network, not accessible to the public, is permitted.
For other purposes, e.g. publication on his/her own website, the author must use the original author-created version of his/her article, i.e. the original submitted file prior to review. He/she may not use the publisher's PDF version. Furthermore, the author may only post his/her version provided acknowledgement is given to the original source of publication and a link (DOI) is inserted to the published article on the JAEE website. The link must be accompanied by the following text: 'The original publication is available at <insert website link here>'.
The author(s) retain all proprietary rights, other than copyright, such as patent and trademark rights to any process or procedure described in the article. The author(s) have the right to photocopy the article for their own personal use.
An author has the right to use (part of) his/her article in subsequent publication of the authors own works provided that written permission is obtained from the publisher and that proper acknowledgement is made to the original source of publication and the publisher. Any other use or reproduction in a collective work requires a fee and permission from the publisher.
The right to grant or refuse permission to third parties to republish part of the article or translations thereof. However, the publisher except at the direction of the contributor(s) will not refuse such permission.
Warrant
While the information in the JAEE is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to material contained herein.
