Analisis Pengaruh Bayangan Sebagian Terhadap Karakteristik Daya Listrik pada PV Array
Abstract
Fenomena Photovoltaic Array (PV Array) tertutup bayangan sebagian sangat berpotensi terjadi pada Pembangkit Listrik Tenaga Surya (PLTS). Fenomena tersebut dapat menyebabkan penurunan perolehan daya listrik pada PLTS. Penurunan daya listrik ini dipengaruhi oleh seberapa besar bayangan yang timbul pada area PV Array. Pada penelitian ini dilakukan pengujian melalui pendekatan simulasi (software) dan eksperimental (hardware) untuk mengetahui efek tertutup bayangan sebagian terhadap penurunan daya listrik keluaran PV Array. Penelitian ini melakukan pengujian secara praktis pada PV Array yang tersusun dari 25 modul PV 3-watt peak. PV Array ini memiliki konfigurasi 5 string dengan daya total 75-watt peak. Pada proses pengujian, digunakan beberapa skema tertutup bayangan sebagian dengan nilai persentase dan bentuk yang bervariasi. Pengujian dilakukan dengan mengambil data arus dan tegangan pada catu daya keluaran PV Array. Selanjutnya daya PV Array dihitung dengan mengalikan nilai arus dan tegangan. Perhitungan ini kemudian disajikan dalam bentuk kurva karakteristik P-V (Daya-Tegangan). Berdasarkan hasil pengujian, masing-masing skema tertutup bayangan sebagian memberikan dampak yang berbeda terhadap penurunan nilai daya listrik serta bentuk kurva karakteristik P-V yang dihasilkan selama proses pengujian. Pada kurva karakteristik P-V, ditemukan adanya sejumlah titik puncak daya (maksimum power point) dengan beragam variasi nilai puncak.
References
[2] “Manfaat Energi Matahari, Alternatif Energi yang Ramah Lingkungan Halaman all - Kompas.com.” https://www.kompas.com/sains/read/2021/05/23/090200823/manfaat-energi-matahari-alternatif-energi-yang-ramah-lingkungan?page=all (accessed Nov. 03, 2022).
[3] C. W. Priananda, A. Rajagukguk, D. C. Riawan, Soedibyo, and M. Ashari, “New approach of maksimum power point tracking for static miniature photovoltaic farm under partially shaded condition based on new cluster topology,” QiR 2017 - 2017 15th International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering, vol. 2017-December, pp. 444–449, Dec. 2017, doi: 10.1109/QIR.2017.8168527.
[4] A. Rajagukguk, D. C. Riawan, and M. Ashari, “Optimization of photovoltaic farm under partial shading effects using artificial intelligent based matrix switch controller,” ICITACEE 2015 - 2nd International Conference on Information Technology, Computer, and Electrical Engineering: Green Technology Strengthening in Information Technology, Electrical and Computer Engineering Implementation, Proceedings, pp. 187–192, Mar. 2016, doi: 10.1109/ICITACEE.2015.7437796.
[5] K. H. Hussein, I. Muta, T. Hoshino, and M. Osakada, “Maksimum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions,” IEE Proceedings: Generation, Transmission and Distribution, vol. 142, no. 1, pp. 59–64, Jan. 1995, doi: 10.1049/IP-GTD:19951577.
[6] S. Khatoon, Ibraheem, and M. F. Jalil, “Analysis of solar photovoltaic Array under partial shading conditions for different Array configrations,” Proceedings of the International Conference on Innovative Applications of Computational Intelligence on Power, Energy and Controls with Their Impact on Humanity, CIPECH 2014, pp. 452–456, Jan. 2014, doi: 10.1109/CIPECH.2014.7019127.
[7] H. Kawamura et al., “Simulation of I-V characteristics of a PV module with shaded PV cells,” Solar Energy Materials and Solar Cells, vol. 75, no. 3–4, pp. 613–621, Feb. 2003, doi: 10.1016/S0927-0248(02)00134-4.
[8] R. Kadri, J. P. Gaubert, and G. Champenois, “An Improved maksimum power point tracking for photovoltaic grid-connected inverter based on voltage-oriented control,” IEEE Transactions on Industrial Electronics, vol. 58, no. 1, pp. 66–75, Jan. 2011, doi: 10.1109/TIE.2010.2044733.
[9] Jafari, Leila & Salavatian, Mamak. (2022). Evaluation of photovoltaic performance integrated with shading system in optimizing building energy consumption in hot arid climates (Case study: an office building in Shiraz).
[10] Akinyemi, E & Abdulkareem, Hassan & Bello, Habeeb & Abdu-Aguye, U. (2022). Technical Review of Partial Shading Detection and Global Maksimum Power Point Tracking for Photovoltaic Systems Operated Under Shading Condition. Journal of Science Education and Technology. 2. 283-293.
[11] Salih, Salih & Taha, Mohammed. (2012). Performance Analysis of Photovoltaic Modules Under Shading Effect. Journal of Engineering, Technology and Innovation. 1. 228-235.
[12] Li, Qingxiang & Zhu, Li & Sun, Yong & Yang, Yang & Lu, Lin. (2020). Performance prediction of Building Integrated Photovoltaics under no-shading, shading and masking conditions using a multi-physics model. Energy. 213. 118795. 10.1016/j.energy.2020.118795.
[13] Nunes, Hugo & Morais, F. & Pombo, José & Mariano, S. & Calado, Maria Do Rosário. (2022). Bypass diode effect and photovoltaic parameter estimation under partial shading using a hill climbing neural network algorithm. Frontiers in Energy Research. 10. 837540. 10.3389/fenrg.2022.837540.
[14] Fethi, Khelaifa & Lamamra, Kheireddine & Khechekhouche, Abderrahmane & Labiod, Chouaib. (2022). Partial shading conditions for photovoltaic system using artificial neural networks technique. Periodicals of Engineering and Natural Sciences (PEN). 10. 46-55. 10.21533/pen.v10i5.2124.
[15] Zhu, Li & Li, Qingxiang & Chen, Mengdong & Cao, Kaiyue & Sun, Yong. (2019). A simplified mathematical model for power output predicting of Building Integrated Photovoltaic under partial shading conditions. Energy Conversion and Management. 180. 831-843. 10.1016/j.enconman.2018.11.036.
[16] Salih, Salih. (2014). Maksimum Power Point Evaluation Of Photovoltaic Modules Under Shading Effect. European Scientific Journal (ESJ) ISSN: 1857 - 7881 (Print). 10.
Manuscript submission
Submission of a manuscript to the Journal of Applied Electrical Engineering (JAEE) implies that the work described has not been published before (except in the form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by responsible authorities at the institution where the work was carried out.
The author warrants that his/her contribution is original and that he/she has full power to make this grant. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. The author affirms that the article contains no unfounded or unlawful statements and does not violate the rights of others. If copyrighted works are included, the author bears responsibility to obtain written permission from the copyright owners and to appropriately credit the sources.
The use of general descriptive names, trade names, trademarks, etc. in the publication, even if not specifically identified, does not imply that these names are not protected by the relavant laws and regulation.
Copyright Transfer Agreement
The Copyright Transfer Agreement must be signed and return to the publisher of JAEE before manuscript can be accepted for publication. The Transfer of copyright to JAEE becomes effective if and when the article is accepted for publication. if the submitted manuscript is not accepted by Journal, all rights will returned to the authors of the work.
All articles published in JAEE are protect by copyright, which cover the exclusive and unlimited rights to reproduce and distribute the article in any form of reproduction (printing, electronic media or any other form), as well as the translation rights for all languages and countries, for the full term (including extensions and renewals). No material published in the JAEE may be reproduced photographically or store on microfilm, in electronic databases, video disk, etc., without first obtaining written permission from the publisher.
Author's rights
The author may send or transmit individual copies of the final published version of his/her manuscripts any format, including the PDF, to colleagues upon their specific request provided no fee is charged, and further-provided that there is no systematic distribution of the manuscript, e.g. posting on a listserve, website or automatic delivery. However posting the article on a secure network, not accessible to the public, is permitted.
For other purposes, e.g. publication on his/her own website, the author must use the original author-created version of his/her article, i.e. the original submitted file prior to review. He/she may not use the publisher's PDF version. Furthermore, the author may only post his/her version provided acknowledgement is given to the original source of publication and a link (DOI) is inserted to the published article on the JAEE website. The link must be accompanied by the following text: 'The original publication is available at <insert website link here>'.
The author(s) retain all proprietary rights, other than copyright, such as patent and trademark rights to any process or procedure described in the article. The author(s) have the right to photocopy the article for their own personal use.
An author has the right to use (part of) his/her article in subsequent publication of the authors own works provided that written permission is obtained from the publisher and that proper acknowledgement is made to the original source of publication and the publisher. Any other use or reproduction in a collective work requires a fee and permission from the publisher.
The right to grant or refuse permission to third parties to republish part of the article or translations thereof. However, the publisher except at the direction of the contributor(s) will not refuse such permission.
Warrant
While the information in the JAEE is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to material contained herein.
