Akuisisi Data Pressure Transmitter melalui CX Supervisor pada STEM Pressure Measurement and Control Plant
Abstract
Process control is one of the automation techniques that has been commonly used to control pressure, temperature, flow and fluid level in industrial factories, which aims to maximize production, maintain product quality levels, safety in production, and create a more economical production process. Based on these needs and situation Politeknik Negeri Batam begin to developing laboratorial module for the students. One of these modules is STEM Pressure Measurement and Control Plant with developed by adding a data acquisition system based on PLC CP1H and CX Supervisor application as data presentation element. The results of this study indicate that the application of the CX Supervisor and PLC CP1H has supported the development of learning, especially in the practice of process measurement and control. From the test results it can be seen that the three pressure transmitters used have linear characteristics according to the specifications of the device. From the test results of the proposed data acquisition system, the measurement results show a value that is close to the actual value with a deviation value of -0.1–0.17 and standard deviations of 0.088, 0.075, and 0.107 and standard errors of 0.024, 0.021, and 0.030, respectively for pressure transmitter with capacitance, piezoresistive, and extensimeter types
References
[2] R. Garcia-Martin, A. González-Briones, and J. M. Corchado, “Smartfire: Intelligent platform for monitoring fire extinguishers and their building environment,” Sensors (Switzerland), vol. 19, no. 10, May 2019, doi: 10.3390/S19102390.
[3] J. Zhang et al., “Design and Application of Seabed Sediment Temperature and Pressure Measurement and Control Software,” J Phys Conf Ser, vol. 2366, no. 1, p. 012012, Nov. 2022, doi: 10.1088/1742-6596/2366/1/012012.
[4] C. Li, B. Sun, P. Jia, Y. Xue, M. Jia, and J. Xiong, “Capacitive Pressure Sensor with Integrated Signal-Conversion Circuit for Higherature Applications,” IEEE Access, vol. 8, pp. 212787–212793, 2020, doi: 10.1109/ACCESS.2020.3027951.
[5] M. Tykhan and V. Teslyuk, “Metrology and Measurement Systems New Type of Piezoresistive Pressure Sensors For Environments With Rapidly Changing Temperature,” Metrol. Meas. Syst, vol. 24, no. 1, pp. 185–192, 2017, doi: 10.1515/mms-2017-0010.
[6] L. Narayana and A. B. Rao, “Design and Development of a Pressure Transmitter Using Modified Inductance Measuring Network and Bellow Sensor,” 2013.
[7] “View of Desain Prototipe Instrumentation Amplifier untuk Sensor SKU SEN0257 pada Kit Couple Tank.” https://jurnal.polibatam.ac.id/index.php/JAEE/article/view/4828/1849 (accessed Jun. 19, 2023).
[8] A. Hartanto and K. K, “Analisa Pressure dan Level pada CE33 Electronic Process Control Berbasis PID,” Journal of Applied Sciences, Electrical Engineering and Computer Technology, vol. 1, no. 2, pp. 13–18, Aug. 2020, doi: 10.30871/ASEECT.V1I2.2360.
[9] A. Setiawan, Sugeng, K. I. Koesoema, S. Bakhri, and J. Aditya, “The SCADA system using PLC and HMI to improve the effectiveness and efficiency of production processes,” IOP Conf Ser Mater Sci Eng, vol. 550, no. 1, p. 012008, Jul. 2019, doi: 10.1088/1757-899X/550/1/012008.
[10] F. Bruno, M. De Marchis, B. Milici, D. Saccone, and F. Traina, “A Pressure Monitoring System for Water Distribution Networks Based on Arduino Microcontroller,” Water 2021, Vol. 13, Page 2321, vol. 13, no. 17, p. 2321, Aug. 2021, doi: 10.3390/W13172321.
[11] Omron, 2014 “USER'S Manual Sysmac CP Series CP1E CPU Unit Software”.
[12] W. ’Mendenhall, R. J. ’ ’Beaver, and B. M. ’ ’Beaver, Introduction to Probability and Statistics , 13 th. California: Cengage Learning, 2009
Manuscript submission
Submission of a manuscript to the Journal of Applied Electrical Engineering (JAEE) implies that the work described has not been published before (except in the form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by responsible authorities at the institution where the work was carried out.
The author warrants that his/her contribution is original and that he/she has full power to make this grant. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. The author affirms that the article contains no unfounded or unlawful statements and does not violate the rights of others. If copyrighted works are included, the author bears responsibility to obtain written permission from the copyright owners and to appropriately credit the sources.
The use of general descriptive names, trade names, trademarks, etc. in the publication, even if not specifically identified, does not imply that these names are not protected by the relavant laws and regulation.
Copyright Transfer Agreement
The Copyright Transfer Agreement must be signed and return to the publisher of JAEE before manuscript can be accepted for publication. The Transfer of copyright to JAEE becomes effective if and when the article is accepted for publication. if the submitted manuscript is not accepted by Journal, all rights will returned to the authors of the work.
All articles published in JAEE are protect by copyright, which cover the exclusive and unlimited rights to reproduce and distribute the article in any form of reproduction (printing, electronic media or any other form), as well as the translation rights for all languages and countries, for the full term (including extensions and renewals). No material published in the JAEE may be reproduced photographically or store on microfilm, in electronic databases, video disk, etc., without first obtaining written permission from the publisher.
Author's rights
The author may send or transmit individual copies of the final published version of his/her manuscripts any format, including the PDF, to colleagues upon their specific request provided no fee is charged, and further-provided that there is no systematic distribution of the manuscript, e.g. posting on a listserve, website or automatic delivery. However posting the article on a secure network, not accessible to the public, is permitted.
For other purposes, e.g. publication on his/her own website, the author must use the original author-created version of his/her article, i.e. the original submitted file prior to review. He/she may not use the publisher's PDF version. Furthermore, the author may only post his/her version provided acknowledgement is given to the original source of publication and a link (DOI) is inserted to the published article on the JAEE website. The link must be accompanied by the following text: 'The original publication is available at <insert website link here>'.
The author(s) retain all proprietary rights, other than copyright, such as patent and trademark rights to any process or procedure described in the article. The author(s) have the right to photocopy the article for their own personal use.
An author has the right to use (part of) his/her article in subsequent publication of the authors own works provided that written permission is obtained from the publisher and that proper acknowledgement is made to the original source of publication and the publisher. Any other use or reproduction in a collective work requires a fee and permission from the publisher.
The right to grant or refuse permission to third parties to republish part of the article or translations thereof. However, the publisher except at the direction of the contributor(s) will not refuse such permission.
Warrant
While the information in the JAEE is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to material contained herein.
