Identifikasi Label Kode Leadframe pada Sistem Uji Fungsi RFID Chip Berbasis Template Matching
Abstract
The label code in a production process has an important function as an identifier. Making label code on leadframe can be done by laser engraving or painting method. The RFID chip is moved to the leadframe media to carry the signal from the die level to the outside circuit. The conductivity function test is carried out to ensure the circuit works after the die attach and wire bond processes from the RFID chip. Based on the case study on TFME, the results of this function test are stored with manual labeling. The template matching method is applied to read the leadframe label code which will then be scanned in the form of a test technical report. This label identification system uses a Raspberry Pi 3 equipped with a Sony IMX219V2 camera with a resolution of 8 MP. 2 characters that are similar, namely numbers 2 and Z, are eliminated from the sample. In addition, the label code is made in characters with vertical and horizontal lines. In this result, a success rate of 100%. This identified label code then becomes the leadframe identification number in the form of a report file that is stored in a document format.
References
[2] S. Ratna, “Pengolahan Citra Digital Dan Histogram Dengan Phyton Dan Text Editor Phycharm,” Technologia: Jurnal Ilmiah, vol. 11, no. 3, pp. 181–186, 2020.
[3] S. Wijaya, H. A. Sudrajat, and R. Arya, “Perancangan Aplikasi Terintegrasi Perangkat Internet of Things (IoT) untuk Pencetakan Label Otomatis,” Jurnal ICT: Information Communication & Technology, vol. 20, no. 2, pp. 394–399, 2021.
[4] S. S. Nurhaliza and L. ETP, “Sistem Pengenalan Karakter Dokumen Secara Otomatis Menggunakan Metode Optical Character Recognition,” PETIR, vol. 15, no. 1, 2022, doi: 10.33322/petir.v15i1.1610.
[5] K. Ibnutama, Z. Panjaitan, and E. F. Ginting, “Modifikasi Metode Template Matching pada OCR Untuk Meningkatkan Akurasi Deteksi Plat Nomor Kendaraan,” Jurnal Teknologi Sistem Informasi dan Sistem Komputer TGD, vol. 2, no. 2, 2019.
[6] M. H. D. Adiartika, I. G. A. Wibawa, and I. G. N. A. C. Putra, “Game Edukasi Pengenalan Huruf Latin Menggunakan Template Matching Untuk Anak Usia Dini,” JELIKU (Jurnal Elektronik Ilmu Komputer Udayana), vol. 9, no. 1, p. 115, Nov. 2020, doi: 10.24843/jlk.2020.v09.i01.p12.
[7] M. Ryan and N. Hanafiah, “An Examination of Character Recognition on ID card using Template Matching Approach,” Procedia Comput Sci, vol. 59, pp. 520–529, 2015, doi: 10.1016/j.procs.2015.07.534.
[8] A. C. Roy, M. K. Hossen, and D. Nag, “License plate detection and character recognition system for commercial vehicles based on morphological approach and template matching,” in 2016 3rd International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), IEEE, Sep. 2016, pp. 1–6. doi: 10.1109/CEEICT.2016.7873098.
[9] B. S. Kurniawan, S. R. Sentinuwo, and O. A. Lantang, “Aplikasi Pengenal Citra Nomor Kendaraan Bermotor Mengunakan Metode Template Matching,” Jurnal Teknik Informatika, vol. 8, no. 1, 2016.
[10] A. P. Kusuma and Darmanto, “Pengenalan angka pada sistem operasi android dengan menggunakan metode template matching,” Register: Jurnal Ilmiah Teknologi Sistem Informasi, vol. 2, no. 2, 2016, doi: 10.26594/register.v2i2.549.
Manuscript submission
Submission of a manuscript to the Journal of Applied Electrical Engineering (JAEE) implies that the work described has not been published before (except in the form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by responsible authorities at the institution where the work was carried out.
The author warrants that his/her contribution is original and that he/she has full power to make this grant. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. The author affirms that the article contains no unfounded or unlawful statements and does not violate the rights of others. If copyrighted works are included, the author bears responsibility to obtain written permission from the copyright owners and to appropriately credit the sources.
The use of general descriptive names, trade names, trademarks, etc. in the publication, even if not specifically identified, does not imply that these names are not protected by the relavant laws and regulation.
Copyright Transfer Agreement
The Copyright Transfer Agreement must be signed and return to the publisher of JAEE before manuscript can be accepted for publication. The Transfer of copyright to JAEE becomes effective if and when the article is accepted for publication. if the submitted manuscript is not accepted by Journal, all rights will returned to the authors of the work.
All articles published in JAEE are protect by copyright, which cover the exclusive and unlimited rights to reproduce and distribute the article in any form of reproduction (printing, electronic media or any other form), as well as the translation rights for all languages and countries, for the full term (including extensions and renewals). No material published in the JAEE may be reproduced photographically or store on microfilm, in electronic databases, video disk, etc., without first obtaining written permission from the publisher.
Author's rights
The author may send or transmit individual copies of the final published version of his/her manuscripts any format, including the PDF, to colleagues upon their specific request provided no fee is charged, and further-provided that there is no systematic distribution of the manuscript, e.g. posting on a listserve, website or automatic delivery. However posting the article on a secure network, not accessible to the public, is permitted.
For other purposes, e.g. publication on his/her own website, the author must use the original author-created version of his/her article, i.e. the original submitted file prior to review. He/she may not use the publisher's PDF version. Furthermore, the author may only post his/her version provided acknowledgement is given to the original source of publication and a link (DOI) is inserted to the published article on the JAEE website. The link must be accompanied by the following text: 'The original publication is available at <insert website link here>'.
The author(s) retain all proprietary rights, other than copyright, such as patent and trademark rights to any process or procedure described in the article. The author(s) have the right to photocopy the article for their own personal use.
An author has the right to use (part of) his/her article in subsequent publication of the authors own works provided that written permission is obtained from the publisher and that proper acknowledgement is made to the original source of publication and the publisher. Any other use or reproduction in a collective work requires a fee and permission from the publisher.
The right to grant or refuse permission to third parties to republish part of the article or translations thereof. However, the publisher except at the direction of the contributor(s) will not refuse such permission.
Warrant
While the information in the JAEE is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to material contained herein.
