RANCANG BANGUN SIMULASI PERGERAKAN HIGH LIFT DEVICE PADA PESAWAT
Abstract
The most high lift device modifying, for small airplanes and large, is the wing flap. Flaps can be installed on the leading edge or trailing edge (only for large airplane) aircraft. To make a simulator, the design and also the drive system are needed which will form the movement as in the real flap. As a driving mode, the system which designed on this flap simulator will use an electronic system. By using a servo motor as a drive and Arduino as a microcontroller that will be programmed according to the planned movement. The flap simulator can produce angles formed on servo motors such as 5º, 14º, 19º, 25º and 30º its moving flaps on flap level 0, 1, 2, 3 and 4 in extend and retract movement modes.
References
[1] Jeppesen. (2016). Airframe Technician Textbook. USA: Englewood.
[2] Kadir, A. (2017). Pemrograman Arduino & Android Menggunakan App Inventor. Jakarta: PT Elex Media Komputindo.
[3] Rahmiati, P. et al.,. (2014). Implementasi Sistem Bluetooth Menggunakan Android dan Arduino untuk Kendali Peralatan Elektronik.
[4] Samuel, H Saroinsong. et al.,. (2018). Rancang Bangun Wahana Pesawat Tanpa Awak (Fix Wing) Berbasis Ardupilot. Jurnal Teknik Elektro dan Komputer. Vol. 7, 1.
[5] https://www.faa.gov/regulations_policies/handbooks_manuals/aviation/phak/media/07_phak_ch5.pdf
[2] Kadir, A. (2017). Pemrograman Arduino & Android Menggunakan App Inventor. Jakarta: PT Elex Media Komputindo.
[3] Rahmiati, P. et al.,. (2014). Implementasi Sistem Bluetooth Menggunakan Android dan Arduino untuk Kendali Peralatan Elektronik.
[4] Samuel, H Saroinsong. et al.,. (2018). Rancang Bangun Wahana Pesawat Tanpa Awak (Fix Wing) Berbasis Ardupilot. Jurnal Teknik Elektro dan Komputer. Vol. 7, 1.
[5] https://www.faa.gov/regulations_policies/handbooks_manuals/aviation/phak/media/07_phak_ch5.pdf
Published
2020-10-31
How to Cite
PUTRA, lalu giat juangsa; SIREGAR, James; QUSYAIRI, Dedy Syarif.
RANCANG BANGUN SIMULASI PERGERAKAN HIGH LIFT DEVICE PADA PESAWAT.
JURNAL INTEGRASI, [S.l.], v. 12, n. 2, p. 122-128, oct. 2020.
ISSN 2548-9828.
Available at: <http://704209.wb34atkl.asia/index.php/JI/article/view/2204>. Date accessed: 28 nov. 2024.
doi: https://doi.org/10.30871/ji.v12i2.2204.
Section
Articles
