DESAIN DAN IMPLEMENTASI INTERLEAVED BOOST CONVERTER UNTUK POWER FACTOR CORRECTION MENGGUNAKAN PENGENDALI LOGIKA FUZZY

  • Mentari Putri Jati Politeknik Elektronika Negeri Surabaya
  • Era Purwanto Politeknik Elektronika Negeri Surabaya
  • Bambang Sumantri Politeknik Elektronika Negeri Surabaya
  • Sutedjo Sutedjo Politeknik Elektronika Negeri Surabaya
  • Dimas Okky Anggriawan Politeknik Elektronika Negeri Surabaya

Abstract

In recent years there is an increasing demand for closely regulated dc power supply. Most of the power electronic converters in these power supplies used full wave rectifier. Bulky filter capacitor in rectifier can effect non-sinusoidal input current waveform (distorted). The difference in voltage and current waveform affected the power factor system. Interleaved Boost Converter (IBC) as Power Factor Correction (PFC) with a fuzzy logic controller to be added in the system to achieved near to unity power factor. IBC operated in Discontinuous Conduction Mode (DCM). Power factor near to unity can be achieved while rectifier supplied resistive load, the waveform of load current through back to input source have the same form with the input voltage. Simulation and hardware implementation is used by varying loads. The experimental results with a variable load value of IBC as PFC can improve the power factor system from 0.67 to 0.93.

References

[1] N. Shaji and D. S. K, “Fuzzy Controlled Power Factor Correctionin AC/DC Interleaved Boost Converter,” Int. Conf. Circuit, Power Comput
Published
2020-04-22
How to Cite
JATI, Mentari Putri et al. DESAIN DAN IMPLEMENTASI INTERLEAVED BOOST CONVERTER UNTUK POWER FACTOR CORRECTION MENGGUNAKAN PENGENDALI LOGIKA FUZZY. JURNAL INTEGRASI, [S.l.], v. 12, n. 1, p. 41-47, apr. 2020. ISSN 2548-9828. Available at: <http://704209.wb34atkl.asia/index.php/JI/article/view/1430>. Date accessed: 28 nov. 2024. doi: https://doi.org/10.30871/ji.v12i1.1430.

Most read articles by the same author(s)